All types of converters, naked or covered :
Characteristics :
Power: 5 W up to 1500 W (depending on the frequency of use)
Types: AC/DC, DC/AC, DC/DC.
Voltages: 6 V to 500 V (depending on the stresses in the specification
Fields of use :
- Conversion of alternating current and into direct current, and vice-versa;
- Continuous power supply, with or without filtering, with or without regulation, with or without forced ventilation, etc.;
- Variable power supply or fixed under voltage;
- Uninterruptible power supply.
Applications :
- Cabinet or components with direct voltage (DC);
- System needing to be powered with very low safe voltage;
- Battery charger and independent power supplies;
- Motor powered by DC.
These values are given as an example and are not exhaustive for particular solutions.
- Our recent productions in this range
Filtered power supply
-
Type of equipment :
AC/DC one-phase power supply
Three phases version also available
Input : 133 or 230 V AC
Output : 24 V DC
Power : 10 W
Frequency : 50/60 Hz
Power class : I
Covered version (IP31)Use :
LED power signalsComments : Higher than 4000V galvanic isolation
Lower than 100 mV to 24 V DC rippleDimensions : 25 x 18 x 22 mm
Weight : 900 gr
One-phase power supply
-
Type of equipment :
One-phase power supply calibrated with 2 currents available.
Input: 220 V AC
Output: DC 24 V 0.1 A and 0.6 A
Accuracy: ±5%Uses :
Start-up and power supply for safety relays, with change of hold.Comments :
Strengthened casing suitable for harsh and dusty environments.Dimensions : 135x135x105 mm
Weight : 0.5 Kg